BSc in
On Campus Bachelor of Science (Civil and Structural Engineering) Engineering Institute of Technology
Introduction
Course at a Glance
- Code: BCSOCP
- Course Length: 3 years full-time
- Course taught in English
Programme Details
Civil and structural engineering is one of the oldest forms of engineering which involves the design, construction, and maintenance of the built environment. Engineers in this field are responsible for ensuring that the infrastructure around us gets developed, is safe, meets our needs, and improves our quality of life. This includes buildings, bridges, railways, tunnels, water distribution, and waste management networks. As a civil engineer, you could be involved in sustainable urban development, environmental protection, conservation of energy and water resources, or even geotechnical, hydraulic, or transport engineering. You could even specialize in fields such as earthquake and blast-resistant technologies.
With this qualification, you will have acquired the essential knowledge which underpins both this and other fields of engineering. More importantly, you will have become a civil and structural engineering technologist.
Accreditation
Like all Australian higher education providers and universities, EIT programmes are accredited by the exacting standards of the Australian Government’s Tertiary Education Quality and Standards Agency (TEQSA). This bachelor’s degree is provisionally accredited by Engineers Australia under the Sydney Accord. It is internationally recognized under the International Engineering Alliance (IEA) accords and the various signatories.
Career Opportunities
Potential Job Outcomes
Potential job roles include engineering and management positions in the following areas of expertise:
- Civil and structural planning, design and development
- Building contracts, sales, commissioning and consultation
- Building control and surveying
- Site management
- Water and waste management
- Civil and structural operations and maintenance
- Civil and structural project management and business development
Gallery
Curriculum
Programme Structure
The degree consists of a combination of core units, sub-discipline specific ‘stream’ units, industrial work experience, and a final year project.
Year One
| Unit Code | Subjects | Credit Points |
| BSC101C | Engineering Mathematics 1 (Core) | 3 |
| BSC102C | Electrical Circuit Theory and Analysis (Core) | 3 |
| BSC103C | Engineering Dynamics + Mechanics (Core) | 3 |
| BSC203C | Engineering Design and Drawing (Core) | 3 |
| BSC109C (Part A) | Industrial Experience Research Project | 0 |
| BSC104C | Engineering Mathematics 2 (Core) | 3 |
| BSC201C | Engineering Programming (Core) | 3 |
| BCS106S | Structural Mechanics | 3 |
| BSC107C | Physics and Chemistry for Engineers (Core) | 3 |
| BSC109C (Part B) | Industrial Experience Research Project | 3 |
| BSC110C | Industrial Experience | 0 |
Year Two
| Unit Code | Subjects | Credit Points |
| BCS108S | Construction Engineering | 3 |
| BSC105C | Mechanics of Machines (Core) | 3 |
| BSC202C | Engineering Mathematics 3 (Core) | 3 |
| BCS205S | Engineering Surveying | 3 |
| >BSC302C (Part A) | Project Planning, Management and Costing (Core) | 0 |
| BCS204S | Strength of Materials – Advanced Topics | 3 |
| BCS206S | Applied Fluid Mechanics | 3 |
| BCS207S | Soil Mechanics | 3 |
| BCS209S | Structural Design and Concrete Structures | 3 |
| BSC302C (Part B) | Project Planning, Management and Costing (Core) | 3 |
| BSC210C | Industrial Experience |
Year Three
| Unit Code | Subjects | Credit Points |
| BCS208S | Hydraulics | 3 |
| BCS301S | Design of Steel Structures | 3 |
| BCS303S | Geotechnical Engineering | 3 |
| BCS304S | Road Design | 3 |
| BSC305C (Part A) | Technology, Sustainability and Society (Core) | 0 |
| BCS306S | Civil Design | 3 |
| BSC307C | Final Year Project (Civil and Structural Engineering) | 9 |
| BSC305C | Technology, Sustainability and Society (Core) | 3 |
Additional Mandatory Units
| Unit Code | Subjects | Credit Points |
| BXX001 | Hands-on Workshop 1 | 0 |
| BXX002 | Hands-on Workshop 2 | 0 |
| BXX003 | Hands-on Workshop 3 | 0 |
| BXX004 | Hands-on Workshop 4 | 0 |
Work-Integrated Learning
EIT’s Bachelor of Science programmes require students to undertake 240 hours of paid or unpaid professional work-integrated learning. This can incorporate paid or unpaid internships, site visits, contributing to industry projects, and networking activities.
In undertaking an internship, students will interact with employees and become exposed to organisational policy and culture. You will familiarize yourself with organisational communication procedures, a variety of engineering disciplines, and obtain insight and practical aptitude in projects from the planning phase to completion.
If you already have some work experience in the relevant engineering field, you may apply to have credit granted by completing the associated recognition of prior learning form.
Time Commitment & Duration
Our bachelor’s degrees take three years to complete full-time. Full-time students will spend about 40 hours per week on the study. This includes attending tutorials.