Double Degree: Electrical Engineering and Electrical Industrial Engineering and Automation

General

Program Description

  • Official title: Graduated in Electrical Engineering and Graduated in Industrial Electronics and Automation Engineering
  • Branch of knowledge: Engineering and Architecture
  • Center: Higher Technical School of Industrial Engineering of Béjar
  • Type of teaching: On-site
  • Spanish Language
  • Regulated profession: Industrial Technical Engineer
  • Duration: 5 academic courses
  • ECTS credits: 276
  • Places of new entry 2019-20: 20 (10 places of each Degree involved are deducted)

Presentation

It is an "institutional program of double degree", regulated by the Regulations on Double Degrees and Simultaneity of Official Teachings of the USAL (Governing Council of 29/2/2011), approved by the Government Council of the USAL of 23/03 / 2015 and was implemented in the 2015-2016 academic year.

It comes from the Degree in Electrical Engineering and the Degree in Industrial Electronics and Automation Engineering which, after passing their respective verification processes, began to be taught at the USAL in the 2010-11 USAL year. It works as a specific curriculum (with specific code and a certain number of places offered annually, 20), consists of a total of 276 ECTS, distributed over 10 semesters (5 academic years), at a rate of 60 credits the first year, 55.5 credits the second, 54 credits the third, 58.5 credits the fourth year and 48 credits the fifth and final year. By type of subject, the 276 ECTS are distributed as follows: 60 of Basic Training, 168 of Compulsory, 24 of Electives and 24 of Final Degree Projects.

Requires the student full-time dedication and qualifies to practice the regulated profession of Industrial Technical Engineer (Order CIN / 351/2009, BOE 20/02/2009).115651_bejar_dg_ingenieria_electrica_electronica.jpg

Students will go to the group of origin of each of the Degrees according to the corresponding subject. In the cases in which the subject of the degree of origin has several groups of practices, will be in only one of the groups of practices of the same, the one that is more convenient for the compatibility of time.

Competencies

The objectives and general and specific competences of this double degree are those of the Degree in Electrical Engineering and those of the Degree in Industrial Electronic and Automatic Engineering.

Admission profile

This Double Degree is designed for students with the capacity for scientific reasoning and the resolution of real problems that allow them to project, direct and coordinate all the activities related to Electrical Engineering and Industrial and Automatic Electronic Engineering. In addition to the essential habit of work, dedication to study and taste for the challenges posed in Engineering.

It is suggested to have passed the Bachillerato, studying in their options Mathematics, Physics and Technical Drawing, and later the entrance exams to the University.

Recommended Baccalaureate subjects

For access to the Double Degree in Electrical Engineering and in Industrial Electronics and Automation Engineering, the maximum weighting 0.2 will be the access notes in the subjects:

  • Technical Drawing II
  • Electrical engineering
  • Physical
  • Mathematics II
  • Industrial Technology II

Recommended subjects

  • Technical Drawing II
  • Electrical engineering
  • Physical
  • Mathematics II
  • Industrial Technology II

Access, Pre-registration, Admission and Registration

New Entry: The 1st year of implementation, there will be 20 new admission places to the Double Degree. In the admission process, the weighting criteria of Baccalaureate subjects for the PAUs foreseen for both Degrees will be applied.

Continuity of studies:

  • Students will be enrolled in the Dual Degree curriculum, either for new enrollment subjects or subjects in which full-time enrollment is repeated, with a minimum of 42 ECTS and a maximum of 90 ECTS. The number may be lower when so is the number of ECTS that remain to be overcome.
  • The students of the Degrees of the industrial branch of the USAL (especially the Degree in Electrical Engineering and the Degree in Industrial Electronic and Automation Engineering) will be able to access the Double Degree through the application for recognition of the credits taken.

Pending subjects: The student must always enroll in the basic education subjects that are pending.

Units of permanence: the Permanence Rules are applied to the Double Degree curriculum, and the student can use a maximum of 18 permanency units.

The Center will solve the requests for access to the Double Degree from qualifications of other Universities based on the effective number of new entry access to the Double Degree and the merits of the applicants:

  • Requests for students with partial Spanish university studies from another university and / or official Spanish university studies and a minimum of 30 ECTS credits.
  • Requests for students with partial or full foreign university studies who have not obtained the homologation of their degree in Spain and a minimum of 30 ECTS is recognized.
  • Applications for students with partial Spanish university studies taken at our university and a minimum of 30 ECTS credits.

All applications for admission to continue studies will be presented at the Secretary of the Higher Technical School of Industrial Engineering of Béjar, completing the form of recognition of the ECTS courses.

The access roads are those officially recognized and regulated by law for official undergraduate university education.

There is no specific test for access to the studies of this Double Degree. The ordering and awarding of places within the planned quota of 20 students will be made according to the admission grade.

Academic and Professional Exits

Academic Outputs

Once you finish the Double Degree in Electrical Engineering and Industrial and Automatic Electronic Engineering, we suggest you study one of the following University Master's degrees at the USAL , if you opt for a greater specialization:

  • Industrial engineer
  • Physics and Technology of Lasers
  • Advanced Multivariate Data Analysis
  • Nuclear physics
  • Intelligent Systems
  • ESO and Baccalaureate Teacher, Vocational Training and Language Teaching

Professional outings

The professional outputs of this double degree are the same as those of the Degree in Electrical Engineering and those of the Degree in Industrial Electronic and Automatic Engineering.

Last updated Mar 2020

About the School

The University of Salamanca (Spanish: Universidad de Salamanca) is a Spanish higher education institution, located in the town of Salamanca, west of Madrid, in the autonomous community of Castile and ... Read More

The University of Salamanca (Spanish: Universidad de Salamanca) is a Spanish higher education institution, located in the town of Salamanca, west of Madrid, in the autonomous community of Castile and León. It was founded in 1134 and given the Royal charter of foundation by King Alfonso IX in 1218. It is the oldest founded university in Spain and the fourth oldest European university in continuous operations. The formal title of... Read less