Bachelor Program in Baden-Württemberg Germany

Top Bachelor Programs in Baden-Württemberg Germany 2017

Bachelor

Bachelor degrees from accredited colleges and universities can be important stepping-stones toward a successful career.The most common type of undergraduate program is a bachelor's degree, usually awarded after four years of successful study

A Bachelor is a popular college degree that is pursued by students who want to gain knowledge in a specific area of study. Completed in three to five years, it is available in a variety of study disciplines.

Germany, officially the Federal Republic of Germany, is a federal parliamentary republic in western-central Europe. The country consists of 16 states, and its capital and largest city is Berlin.

Baden-Württemberg is a state in Germany that has over 10 million people. It is divided into 35 districts and has 9 independent cities. The state boasts of having some of the most renowned and oldest Universities that have a prestigious status in Germany.

View Bachelor Degrees in Baden-Württemberg in Germany 2017

Read More

Bachelor in Politics, Administration & International Relations

Zeppelin University
Campus Full time 4 years August 2017 Germany Friedrichshafen

For modernizers of public administration. Political consultants. Experts on Europe. Process innovators. Developmental aid workers. Privatizers. Nationalizers. Public policy experts. UN-employees. Foundation managers. Electoral Researchers. Producers of public goods. Non-profit managers. Social entrepreneurs. Please note: German language skills required! [+]

Bachelors 2017 in Baden-Württemberg Germany. For modernizers of public administration. Political consultants. Experts on Europe. Process innovators. Developmental aid workers. Privatizers. Nationalizers. Public policy experts. UN-employees. Foundation managers. Electoral Researchers. Producers of public goods. Non-profit managers. Social entrepreneurs. Please note: German language skills required! Our claim: To find answers to global challenges PAIR is a study pro­gram in po­lit­i­cal and ad­min­is­tra­tive sci­ence mainly taught in Ger­man. It ad­dresses stu­dents who want to an­a­lyze po­lit­i­cal sys­tems in mod­ern so­ci­eties from a na­tional, in­ter­na­tional, and Eu­ro­pean per­spec­tive. At the same time - and from the per­spec­tive of or­ga­ni­za­tional re­search and mod­ern man­age­ment the­ory - na­tional and in­ter­na­tional or­ga­ni­za­tions are an­a­lyzed, and a wide knowl­edge of pub­lic man­age­ment in mod­ern states is taught. Thus, the stu­dents learn to an­a­lyze and solve com­plex prob­lems of de­ci­sion-mak­ing and gov­er­nance in the pub­lic sec­tor in their po­lit­i­cal, legal, eco­nomic, and so­cial con­text. As all other study pro­grams at ZU, PAIR has a strong in­ter­dis­ci­pli­nary ori­en­ta­tion which can not only be seen in the so-called Zep­pelin Year, the first two se­mes­ters, but also in the elec­tive mod­ules from re­lated study pro­grams in later se­mes­ters. At the same time the study pro­gram pro­vides the chance of a sub­ject-spe­cific spe­cial­iza­tion that en­sures the best pos­si­ble com­pat­i­bil­ity for mas­ter pro­grams in po­lit­i­cal and ad­min­is­tra­tive sci­ence. Im­por­tant Note: All bach­e­lor pro­grams at Zep­pelin Uni­ver­sity re­quire sound knowl­edge of Ger­man. Al­though 40 per­cent of our courses are taught in Eng­lish, your Ger­man knowl­edge should be at least on the C1 level of the CEFR in order to start a suc­cess­ful study pro­gram at ZU. There­fore, we re­gret that we can­not ac­cept ap­pli­ca­tions writ­ten in Eng­lish. [-]

Bachelor in Sociology, Politics & Economics

Zeppelin University
Campus Full time 4 years August 2017 Germany Friedrichshafen

For those who think and calculate outside the box. Analyzers and modelers. Bleeding-hearts and doubters. Those who are disciplined and irritated. Yes-men and naysayers. Those who are decided and hesitant. Please note: German language skills required! [+]

For those who think and calculate outside the box. Analyzers and modelers. Bleeding-hearts and doubters. Those who are disciplined and irritated. Yes-men and naysayers. Those who are decided and hesitant. Please note: German language skills required! SPE is a study program taught in German. Among others, it addresses the following questions: How do you formulate the basic concepts of power, money, law, of war and peace, of games and machinations? What is the difference between society on the one hand, and politics and economic activity on the other? How is the market economy changing under the conditions of international political coordination? How does a democracy work under the conditions of multinational corporations, speculative capital markets, and fluctuating protest movements? To what extent do social inequality, poverty, and exclusion threaten social peace? How do politics and law shape the conflicts of global society? How do migration and urbanization change people´s living conditions? Interdisciplinary way Based on topics such as urbanity, sustainability or migration, the study program SPE combines the points of view of the disciplines of sociology, political science, and economics. SPE students work in an interdisciplinary way in order to find comprehensive solutions to the important questions of our society. The study program is to enable them to deal with the problems, dates, ideas, and arguments of different social fields of activity in a knowledge-based and discursive way. The study program enables you to do both: to continue your studies in advanced master programs, or to acquire professional skills to support decision-making processes, to define and solve problems, and to reflect on alternative chances for orientation. The graduates of the study program take over responsibility in the internal and external diagnosis, consulting, and shaping of political projects, entrepreneurial investments, social and technical innovations, organizational development, problems of the church, academic research, and journalistic reporting. Important Note: All bachelor programs at Zeppelin University require sound knowledge of German! Although 40 percent of our courses are taught in English, your German knowledge should be at least on the C1 level of the CEFR in order to start a successful study program at ZU. Therefore, we regret that we cannot accept applications written in English. [-]

Bachelor in Communication, Culture and Management

Zeppelin University
Campus Full time 4 years August 2017 Germany Friedrichshafen

For prime movers, clear-sighted dreamers, curators, consultants, researchers, theatre producers, copywriters, cultural movers and shakers, opinion formers, wordsmiths, activists, music gurus, masterminds, media entrepreneurs, journalists, museum directors, social entrepreneurs, individualists, funding managers, start-ups, trendscouts, program directors, radio innovators; for those with a sense of mission and for their critics. [+]

Bachelors 2017 in Baden-Württemberg Germany. For prime movers, clear-sighted dreamers, curators, consultants, researchers, theatre producers, copywriters, cultural movers and shakers, opinion formers, wordsmiths, activists, music gurus, masterminds, media entrepreneurs, journalists, museum directors, social entrepreneurs, individualists, funding managers, start-ups, trendscouts, program directors, radio innovators; for those with a sense of mission and for their critics. Within the Zeppelin Universität CCM program the emphases are on the digital revolution, new media and its production, the shifts in artistic and cultural practices and emerging developments in the organization of communication and cultural processes. The program provides the means to be active and critically-engaged in the contemporary cultural sector, in media and communications and to initiate research in these areas, developing the capacity to think conceptually and supporting reflective approaches in understanding contemporary models, practices and means of distribution. The study program focuses on a theoretical reflection on society to understand processes and to develop a profound awareness of social, artistic, media and political structures. At the same time the students have the opportunity to intervene in these processes through practice-led approaches. Within CCM the aim is to analyze complex subjects and ideas in a contextual and a problem-directed manner. Through this approach the students acquire the ability to recognize the challenges and opportunities that communication and culture face in the current digital revolution, and the resulting changes in cultural practices. The program aims to develop competencies in students suitable for the broad range of requirements in the contemporary management of culture and media. The University’s innovative Zeppelin and Humboldt Years provide students the creative space and intellectual latitude in which to explore interdisciplinary topics and independent learning in the development and pursuit of research projects. Through these opportunities, the BA CCM promotes the students´ research competencies, as well as their interconnectedness, nationally and internationally, and ensures and maintains strong links to an MA in CCM and a further PhD study in the fields of cultural and media studies. Important Note: All undergraduate programs at Zeppelin University require advanced German language skills! Although 40 percent of our courses are taught in English, your knowledge of the German language should be at least on the C1 level of the CEFR in order to start a successful study program at ZU. We regret that we cannot accept applications written in English. [-]

Bachelor in Corporate Management & Economics

Zeppelin University
Campus Full time 8 semesters August 2017 Germany Friedrichshafen

CME is a study program taught in German language. It is based on the observation that today´s managers and entrepreneurs increasingly have to face challenges that cannot be met with the classical function areas of business administration and economics alone. [+]

For company founders. Social entrepreneurs. Business consultants. Investment bankers. Coffee house founders. Automobile experts. Financial jugglers. Successors of family businesses. Booksellers. Global corporate leaders. NPO specialists. Lobbyists. Consumer researchers. Creative sales people. Music publishers. Please note: German language skills required! CME is a study program taught in German language. It is based on the observation that today´s managers and entrepreneurs increasingly have to face challenges that cannot be met with the classical function areas of business administration and economics alone. The traditional management training is thus reaching its limits. To face the new challenges, expansions in the areas of communication and organizational theory, as well as political science, are becoming essential. ZU reacts to these challenges by offering an outstanding program that combines business administration and economics with cultural studies, communication sciences, and media studies, as well as with aspects of political and administrative sciences. Yet: Sound knowledge of mathematics is an important prerequisite for studying corporate management and economics at our university. Important Note: All bachelor programs at Zeppelin University require sound knowledge of German. Although quite a few of our courses are taught in English, your German knowledge should be at least on the C1 level of the CEFR in order to start a successful study program at ZU. Therefore, we regret that we cannot accept applications written in English. [-]

LLB In Tax Administration

University Of Applied Sciences Ludwigsburg - Public Administration and Finance
Campus Full time 3 years October 2017 Germany Ludwigsburg

In the study course "Elevated service in the Tax Administration" (control program) of the Department 2 - Tax and business law - is assigned, the students are trained professional theory and professional practice for the activities of the higher service of the Tax Administration ... [+]

Bachelors 2017 in Baden-Württemberg Germany. In the study course "Elevated service in the Tax Administration" (control program) of the Department 2 - Tax and business law - is assigned, the students are trained professional theory and professional practice for the activities of the higher service tax administration. The objective of the study is the career examination for the elevated service of the Tax Administration and the related award of the university degree Bachelor of Laws (LL.B). After 3 years of tax studies, graduates can be employed as a clerk in the entire tax administration eg in the tax, at the Regional Finance Office or the Ministry of Finance. Moreover, they can also act wherever fiscal, legal and, economy-scientific expertise is in demand. This is possible because the control program is not only a specialist training for the entire tax law but also a generalist study of Law and Economics. In vocational education tax studies at the University of Ludwigsburg and in practical training at the tax offices and the methodological and social skills are formed in addition to the tax, legal and economics skills that are needed for various tasks in the areas of taxation and economic. Duration of the control study: 3 years The control program includes specialized studies with 21 months duration at the university and a 15-month practical training in the education tax offices the Oberfinanzdirektion Karlsruhe. Status during control study Students are official candidates / inside and get an education provided by approximately 1,000 EUR. The students are in the preparatory service the level career of the tax administration. Beginning of the tax study The bachelorisierte control program begins on 1 October of setting the vintage with the basic studies. destinations Students are expected due to the mediated theoretical analytical skills acquired methodological and social action skills and are mixed with a sound knowledge of German tax law in a position to meet the varied and demanding tasks of tax administration. The studies at the Academy and practical training in the education tax offices convey the essential content of the tax law and the principles of civil law and public law. The control program also provides an understanding of economic, business management and international relations. Students are trained to become experts in tax law and therefore also have the best career opportunities in many areas of industry. course structure The control program is divided into four stages of study (undergraduate degree I with 5 months, Basic Studies II 4 months, basic studies III 5 months and graduate with 7 months) and in four practical phases. Thus the concept of dual training is realized. Bachelor thesis Before and during the main course, students have to prepare a bachelor thesis. The thesis must have been at least with sufficient "rated". Tests and performance checks Due to legal requirements, an intermediate examination for the modules to be studied in the basic course I provided at the end of the first part of the basic studies. The existence of the intermediate examination is a prerequisite for the continuation of the control studies. After undergraduate studies II / III final exams are scheduled for the modules in this study sections to be studied, influence the overall result of the career examination and the Bachelor grade. At the end of the main study is the career examination and the Bachelor's degree. As part of the writing career examination are to be processed for five modules practice exams. is completed, the control study with the oral career examination. The performance shown in the tests affect the overall results of the career examination and the Bachelor grade. The performance during the practical training or for practice modules are evaluated and affect the overall results of the career examination and the Bachelor grade. The existence of all individual modules during control study is a prerequisite for the award of the Bachelor degree. graduation Students are awarded with passing the career examination of the degree of "Bachelor of Laws" (LL.B.). [-]

BEng in Electrical & Electronic Engineering (full-time)

University of Bolton
Campus Full time 3 years

The BEng (Hons) in Electrical & Electronic Engineering is an internationally recognised qualification that will give you the skills to develop a career in most areas of modern electrical and electronic engineering. You will study both the theoretical and practical nature of electrical and electronic engineering. There will be a significant emphasis on the application of electronics in the form of embedded systems – electronic systems that... [+]

Electrical & Electronic Engineering (EEE) - BEng (Hons) full-time The BEng (Hons) in Electrical & Electronic Engineering is an internationally recognised qualification that will give you the skills to develop a career in most areas of modern electrical and electronic engineering. You will study both the theoretical and practical nature of electrical and electronic engineering. There will be a significant emphasis on the application of electronics in the form of embedded systems – electronic systems that can be embedded in other products that are not necessarily electronic, such as cars, medical or other industrial systems. The course also covers cutting edge and emerging technologies. These include the smart grids that will form the next generation of electrical services worldwide as electrical grids are modernised, as well as body area networks – wireless networks of wearable computing devices that have many potential applications including inexpensive and continuous health monitoring. The final level of the course offers optional modules that will allow you to gain specialist knowledge in areas of applied electronics that are in significant demand in industry. These include areas such as digital signal processing, integrated circuit design, power systems, smart grids and renewable energies. About the course This area of engineering is well established at the University of Bolton with a history of more than forty years in various formats. The teaching staff bring extensive academic and industrial expertise to the course, incorporating their practical, applied and research oriented experience into the teaching programme. The course is different to many similar courses in that it has a much higher laboratory-based content. As a graduate of this programme you will be able to demonstrate that you will be of more immediate and direct benefit to potential employers than the theoretically-based students from competitor courses. Project work features significantly at each level of the course and is developed in a coordinated way to lead you from a first encounter with electrical and electronic design to undertaking a major individual project in your final year. Your project activity becomes the focus for the application of the diverse knowledge and skills that are developed during your course of study. The department offers industry-standard facilities, including a wide variety of CAD and design simulation software. Special features The course uses a wide variety of assessments including project based learning, assignments, and formal examinations. The module learning material will be made available on our virtual learning environment (Moodle) allowing you to support your face-to-face learning with study at a time and location to suit you. We also have dedicated application servers that host the CAD, simulation and software tools used throughout the course. Many of these software packages are available online, giving you the greatest flexibility possible in terms of where and when you can complete your assignments and projects. What you will learn You will learn the theories and principles of electrical and electronic engineering and their application to applied projects. Specifically during the first level of the course you will be taught the fundamental concepts of electrical principles, analogue and digital electronic engineering and embedded computer systems and programming. During the second level the same subjects are taught but at a higher level and more emphasis is placed on the design and implementation of small systems. Also new topics are introduced including instrumentation and control and signal processing. You will also study the fundamentals of communication theory given that this an essential background to the wireless applications that are becoming so prevalent in modern consumer and industrial electrical and electronic engineering. At the final level you will study one of four optional specialist modules and undertake an individual project. Throughout the course you will learn the principles of management and enterprise which are key skills for the graduate engineer. Learning is achieved through lectures, practical work and tutorials, supported by considerable hands-on use of computers and advanced technical equipment. The application of ideas, principles and techniques is emphasised by the use of experimentation and project work, together with relevant case-studies. What you will study Level 1 (Level HE4) Introductory Engineering Mathematics; Introductory Electrical Principles; Engineering Environment; Introductory Digital Electronics; Introductory Analogue Electronics; Introductory Embedded Systems. Level 2 (Level HE5) Engineering Modelling and Analysis; Instrumentation and Control; Intermediate Digital Electronics and Communications; Intermediate Electrical Principles and Enabling Power Electronics; Intermediate Embedded Systems; Analogue Signal Processing and Communications. Level 3 (Level HE6) Project; Management and Enterprise in Engineering; Electrical Machines and Power Electronic Drives; Engineering Electromagnetism. Optional modules (choose one): Digital Signal Processing; Integrated Circuit Design; Power Systems and Smart Grids; Renewable Energies. Entry requirements 240 UCAS points from at least two A2-levels (or equivalent) including mathematics, or successful completion of the Engineering Foundation Year. You should also have five GCSEs at grade C or above (or equivalent) including English, mathematics and science. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

BEng in Mechanical Engineering

University of Bolton
Campus Full time 3 - 5 years

The BEng (Hons) Mechanical Engineering at the University of Bolton will equip you with the skills and knowledge for a career in the mechanical engineering profession – a profession that is essential in so many areas of the modern world, including design and manufacture, construction, energy, aerospace and automobile manufacture. Throughout the course, you will develop management, organisation and employability skills alongside your... [+]

Bachelors 2017 in Baden-Württemberg Germany. Mechanical Engineering - BEng (Hons) The BEng (Hons) Mechanical Engineering at the University of Bolton will equip you with the skills and knowledge for a career in the mechanical engineering profession – a profession that is essential in so many areas of the modern world, including design and manufacture, construction, energy, aerospace and automobile manufacture. Throughout the course, you will develop management, organisation and employability skills alongside your subject-specific knowledge and understanding. Your studies will focus on particular areas of engineering such as mechanical design, systems engineering, analysis of materials and structures, and the theory and application of finite element analysis. You will study the theory and practice of mechanical engineering, and carry out case studies, practical and laboratory work and problem-solving projects. You will also develop the presentation and managerial skills that you will use to manage engineering projects and support your future career development in the industry. The BEng (Hons) Mechanical Engineering is one of a series of programmes offered by the University of Bolton that runs within an integrated MEng/BEng format. These courses share modules at levels HE4 and HE5 and the routes diverge at level HE6 where this course offers dedicated BEng (Hons) modules. This course has recently been reviewed and reconfigured by the University with a view to gaining accreditation from the Institution of Mechanical Engineers (IMechE). The course uses UK-SPEC learning outcomes and has been designed to meet the academic requirements leading to Chartered Engineer (CEng) status. Please see the Engineering Council UK website for further details of UK-SPEC. About the course The Engineering Department has a strong tradition in the field of engineering education and engineering courses have been delivered successfully at Bolton for 40 years. All of our academic staff are highly qualified in their own fields and many of them are chartered engineers with substantial experience in the engineering sector. The department offers a friendly, yet challenging, environment where the emphasis is on both the theories and principles of mechanical engineering and their application in a work context. During your studies you will have the opportunity to work on real engineering projects and participate in inter-university student competitions. The course has been designed so that you may transfer to the MEng programme if you wish to do so and have performed to an appropriate standard in your Level HE5 studies. Special features You will have access to modern, dedicated engineering laboratories and the University’s state-of-the-art design development and project facilities. The design and project areas are equipped with industry-standard engineering design, analysis and manufacturing software, including SolidWorks, Ansys, Delcam and other visualisation and prototyping capabilities. The course brings together a broad range of engineering design and analysis disciplines and emphasises the application of engineering principles to real-life engineering problems and situations. Staff are approachable, friendly and supportive and you will be taught in modern teaching rooms, with small class sizes. Teaching staff are highly qualified within their fields and have substantial teaching and industrial experience. Many have established an excellent reputation for their work both nationally and internationally and are engaged in research relevant to their discipline; for example, in composite materials and artificial intelligence. Your final year project allows you to demonstrate your knowledge and understanding when investigating and providing solutions to engineering problems. Some projects may be on ‘live’ problems from local industry or in-house research activity. Participation in the IMechE’s annual Undergraduate Design Challenge involving all universities in the North West What you will learn You will learn the key theories and principles of mechanical engineering and their application in real engineering contexts. You will acquire the relevant knowledge and skills required by a modern mechanical engineer to undertake the challenging, and rewarding, roles available in this sector. You will develop an understanding of all aspects of engineering projects; for example, costings, the science and maths of these projects, functional design materials and project management. You will also develop the necessary business skills for a career in this field such as IT, time management, presentation, oral and written communications. What you will study Level HE4 Engineering Principles 1+2; Engineering Environment; Graphical Communications and Computer Modelling; Projects and Systems. Level HE5 Engineering Applications; Mechanics of Materials and Machines; Thermofluids and Control Systems; Engineering Modelling and Analysis; Mechanical Design. Level HE6 BEng (Hons) Design and Individual Project; Advanced Thermofluids and Control; Advanced Structures and Materials; Finite Element and Difference Solutions; Management and Enterprise in Engineering. Entry requirements For applicants holding NQF/QCF Level 3 qualifications: - 240 UCAS points from at least two A2-levels (or equivalent) including mathematics and another relevant subject such as technology, engineering or science, both to at least AS-level (or equivalent). - Additional mathematics subjects, such as further maths and statistics, will be accepted as a relevant subject. - You should also have five GCSEs at grade C or above (or equivalent) including English, mathematics and science. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). For applicants holding HNC/D qualifications and/or industrial experience: - If you have an HND/C in Mechanical Engineering (or an appropriate engineering discipline) then you may be considered for entry to level 2 of this programme depending on the subject area of qualification, the level of maths and science that you have achieved, as well as your industrial experience. - If you are granted full exemption from the level 1 modules of this course you will be able to complete the course in three years if you take 80 credits per year. Otherwise, it will take you four or five years to complete the course. [-]

BEng in Automotive Performance Engineering (Motorsport)

University of Bolton
Campus Full time 3 - 5 years

The University of Bolton’s BEng (Hons) in Automotive Performance Engineering (Motorsport) will equip you with the skills and knowledge for a career as an engineering professional. This profession is essential in many areas of the modern world, including automobile design, energy conservation, motorsport and automobile manufacture. We have created a unique and fantastic opportunity for you to work within the automotive/motorsports industry. We have... [+]

Automotive Performance Engineering (Motorsport) - BEng (Hons) The University of Bolton’s BEng (Hons) in Automotive Performance Engineering (Motorsport) will equip you with the skills and knowledge for a career as an engineering professional. This profession is essential in many areas of the modern world, including automobile design, energy conservation, motorsport and automobile manufacture. We have created a unique and fantastic opportunity for you to work within the automotive/motorsports industry. We have teamed up with RLR Msport, and other industry professionals, so that we can offer you genuine practical experience while you study at the University. You will work alongside these industry professionals to analyse data (from pit stops, etc.), design new parts, make improvements to their racing cars, test their aerodynamics and much more. Throughout the course you will develop subject-specific knowledge and understanding with parallel business and management skills. Your studies will focus on particular areas of engineering such as analysing automotive performance, vehicle structures and systems, powertrains and aerodynamics. You will study both the theory and practice of automobile engineering. You will explore its organisation and management and, at each level, you will carry out case studies, practical and laboratory work and problem-solving projects and activities. You will also develop the presentation and managerial skills that you will use to manage engineering projects and support your future career development in the industry. About the course The BEng (Hons) Automotive Performance Engineering (Motorsport) programme has been designed and developed with the assistance of local employers. These continue to take a great interest in the progress of the programme and its students. The course will satisfy those who appreciate and are motivated by analytical challenges, using mathematical and scientific applications to solve engineering problems. It will develop your knowledge and understanding in a real world context, reflecting both current engineering practices and academic developments in the subject. We provide a progressive learning environment that will help you develop and apply a broad range of skills necessary for employability. You will develop a capacity for reasoning and analysis, interpretation of findings and application of concepts. Practical and transferable skills including communication, teamwork, organisation and time management, numeracy and competent use of information technology will all be developed. The University of Bolton has over 20 years’ experience of running degree courses in automotive engineering subjects. This degree is unique because the University works closely with an international motorsport team, RLR Msport. Based next to the Universities’ own laboratories, RLR Msport are an independent racing team who race in the Le Mans 24hr race, history Formula 1, speed series sports racing, and other international events. As well as RLR Msport being on the University site, our three dedicated laboratories have been refurbished with new performance measurements, computer aided manufacturing, and composite manufacturing equipment. We also offer engine test beds and a 1/10th scale wind tunnel. Additionally, the latest industry based software and analysis tools are available in our new CAD suite. The University is also involved with other performance car and racing organisations, which can provide employment opportunities. Special features This course has been specifically designed to meet industry needs. We offer excellent, individual tutor support. You will have access to dedicated materials and state-of-the art engine testing facilities, vehicle systems and engineering laboratories, the University’s unique design studio and Innovation Factory. The course is only available at the University of Bolton and offers a unique learning experience. You will work with some of the top industry professionals. The range of teaching and learning methods includes visits, workshops, guest speakers and practical sessions involving employers in the industry. The design facilities are equipped with industry-standard engineering design and analysis software. We bring together a broad range of design disciplines, including designers, engineers, technologists and students in a pioneering new concept in design development and knowledge transfer between industry and academia. The Centre for Advanced Performance Engineering (CAPE) is a purpose-built facility designed to bring together industry and the University to generate an inventive environment that is unparalleled within academia. We have invested heavily to bring you an outstanding range of design and engineering facilities, including specialist workshops, laboratories and testing facilities. What you will learn Many modules include assessment through assignments which include a substantial amount of hands-on testing. This focus on applied skills is a theme throughout the course, reflecting working practices in the industry. Throughout your studies, you will develop an understanding of automotive/motorsport computer systems and electronics. You will also learn about vehicle handling, chassis aerodynamics and suspension mechanics as well as the fundamentals of internal combustion science and tuning. You will gain an insight into the broader issues of transport and the environment, as well as develop transferable skills such as project management, team working, IT and formal presentations. You will also develop the intellectual capabilities of research, problem solving, evaluation and synthesis. In your final year you will work on a project module which will give you the opportunity to develop your skills and knowledge in an area relevant to your own interests. Those students who excel will be given the unique opportunity to work on their coursework with our partners RLR Msport. This is a fantastic opportunity to gain experience with a real racing team. As well as lectures, seminars, examinations and tutorials your learning will be enhanced with visits and guest speakers from industry, international case studies and workshops. These will give you unique insights and a thorough understanding of the sector. What you will study Level 1 Engine Systems and Aerodynamics (MSP4000); Vehicle Systems (MSP4002); CAD/CAM (MSP4003); High Performance Materials (MSP4004); Performance Engineering Sciences (MSP4006); Engineering Mathematics (MSP4007). Level 2 Powertrains and Aerodynamics (MSP5000); Chassis Development and Telemetry (MSP5001); Team Project (MSP5002); Auto and Component Design (MSP5003); Mechanics of Materials (MSP5005); Engineering Modelling and Analysis (MSP5007). Level 3 Performance Modelling and CFD (MSP6000); Vehicle Dynamics and Advanced Electronics (MSP6001); Individual Automotive Project (MSP6002); Race-Car Design Project (MSP6003); Advanced Materials and Structures (MSP6005); Management in Engineering (MSP6007). Entry requirements 240 UCAS points from at least two A2-levels (or equivalent) including mathematics, or successful completion of the University of Bolton Engineering Foundation Year. You should also have five GCSEs at grade C or above (or equivalent) including English, mathematics and science. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

BEng in Civil Engineering (full-time) [Ras al Khaimah Campus, UAE]

University of Bolton
Campus Full time 3 years

The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. By studying on the course you will develop the necessary theoretical understanding and practical knowledge for the role and you will enhance your ability to apply the principles of analysis and evaluation in civil... [+]

Bachelors 2017 in Baden-Württemberg Germany. Civil Engineering - BEng (Hons) full-time [Ras al Khaimah Campus, UAE] The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. By studying on the course you will develop the necessary theoretical understanding and practical knowledge for the role and you will enhance your ability to apply the principles of analysis and evaluation in civil engineering and construction-related problems. About the course Our dedicated staff team will provide you with a high level of support throughout your studies. All the teaching staff are construction industry professionals with extensive experience and knowledge of the industry and they are all active in the industry’s professional bodies. You will learn through a mix of learning methods including field, laboratory and project work, lectures, seminars and tutorials. Assessment methods include coursework, project work, presentations and examinations. A large proportion of your studies will mirror conditions in the industry. This includes an interdisciplinary group project in your final year which simulates the process of a construction project from inception to completion and in which you will carry out the role of a civil engineer working within a team of other construction specialists. As the department has close contacts with the industry you may have the opportunity to take part in site visits. Professionals from the construction industry, including former students, regularly give talks and lectures on the course. What you will learn You will acquire a thorough understanding of the practical skills in civil engineering, including construction techniques, the properties of construction materials, structural, geotechnical, hydraulics, surveying, highway and transport engineering. You will build your knowledge of the theoretical principles that underpin the role, including applied mathematics and research methods and learn the relevant associated skills in communications, IT and management. What you will study Level 1 (HE4) Communications Technology; Construction and Materials Technology 1; Ground and Water Studies 1; Site Surveying and Site Practice; Mathematics and Structural Analysis; Mathematics and Structural Design. Level 2 (HE5) Construction Management; Ground and Water Studies 2; Highway Design and Control; Research Methods and Professional Practice; Engineering Mathematics and Structures; Construction and Materials Technology 2. You will attend a combined six day residential field course for Surveying and Geotechnical Engineering. Level 3 (HE6) Advanced Structural Analysis and Design; Dissertation; Geotechnical Engineering and Ground Improvement; Interdisciplinary Project. In addition, you will study one optional module* selected from Advanced Surveying Procedures; Concrete Technology and Practice; Construction Management; Project and Environmental Management; Structural Planning; Transport Studies; and Water Engineering and the Environment (*subject to availability). Entry requirements 240 UCAS points from at least two A2-levels (or equivalent) including mathematics (or equivalent), or successful completion of the Engineering Foundation Year. General Studies will not be counted towards the UCAS points requirement. You should also have five GCSEs at grade C or above (or equivalent) including English, mathematics and science. [-]

BEng in Civil Engineering

University of Bolton
Campus Part time 4 - 5 years

The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. By studying on the course you will develop the necessary theoretical understanding and practical knowledge for the role and you will enhance your ability to apply the principles of analysis and evaluation to civil... [+]

Civil Engineering - BEng (Hons) part-time The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. By studying on the course you will develop the necessary theoretical understanding and practical knowledge for the role and you will enhance your ability to apply the principles of analysis and evaluation to civil engineering and construction-related problems. You will have access to well-equipped materials, hydraulics, geotechnical and structures laboratories, an extensive range of the latest surveying equipment and the University’s unique design studio facilities with the latest CAD software and hardware. PLEASE NOTE: Students starting in 2012 in year 1 this course has replaced the BSc (Hons) Civil Engineering. *We are currently seeking accreditation from the Joint Board of Moderators. The resulting accreditation event may lead to minor changes to the validated programme. About the course Our dedicated staff team will provide you with a high level of support throughout your studies. All the teaching staff are construction industry professionals with extensive experience and knowledge of the industry and they are all active in the industry’s professional bodies. You will learn through a mix of learning methods including field, laboratory and project work, lectures, seminars and tutorials. Assessment methods include coursework, project work, presentations and examinations. A large proportion of your studies will mirror conditions in the industry. This includes an interdisciplinary group project in your final year which simulates the process of a construction project from inception to completion and in which you will carry out the role of a civil engineer working within a team of other construction specialists. As the department has close contacts with the industry you may have the opportunity to take part in site visits. Professionals from the construction industry, including former students, regularly give talks and lectures on the course. Special features The University’s unique design studio offers excellent facilities including CAD software and hardware. There is a strong emphasis on hands-on training and experience throughout the department and you will have the opportunity to carry out tests and work with construction materials using the University’s first-rate laboratory facilities. You will receive support throughout your studies from teaching staff who are all professionals from the construction industry with excellent business and professional contacts. What you will learn You will acquire a thorough understanding of the practical skills in civil engineering, including construction techniques, the properties of construction materials, structural, geotechnical, hydraulics, surveying, highway and transport engineering. You will build your knowledge of the theoretical principles that underpin the role, including applied mathematics and research methods and learn the relevant associated skills in communications, IT and management. What you will study Level 1 (HE4) Construction and Materials Technology 1#; Ground and Water Studies 1; Site Surveying and Site Practice; Mathematics and Structural Analysis; Mathematics and Structural Design. *You must study this module if you didn't complete an equivalent module during your previous Higher Education qualification. You would take this module during an extra semester, so it would add 0.5 years to the duration of your study. Level 2 (HE5) Construction Management; Ground and Water Studies 2; Highway Design and Control; Research Methods and Professional Practice; Engineering Mathematics and Structures; Construction and Materials Technology 2. Level 3 (HE6) Advanced Structural Analysis and Design; Dissertation; Geotechnical Engineering and Ground Improvement; Interdisciplinary Project. In addition, you will study one optional module* selected from Advanced Surveying Procedures; Concrete Technology and Practice; Construction Management; Project and Environmental Management; Structural Planning; Transport Studies; and Water Engineering and the Environment (*subject to availability). Entry requirements You should have a UK HNC, HND, foundation degree or honours degree in an appropriate subject (or equivalent). You may be admitted to level 2 (HE5) of the part-time BSc (Hons) Civil Engineering if you have successfully completed the University of Bolton's HNC Civil Engineering with at least 60% in each of your modules. Holders of any other HNC Civil Engineering qualification will normally only be considered for entry to level 1 (HE4) of this course. If you hold a higher education qualification in a subject area such as mathematics, geology or physics you will be considered for entry to level 1 (HE4) of the course. You should be a confident user of mathematics, but you do not need to have studied construction or engineering previously. You may be invited for interview as part of the selection process. If your highest qualifications are currently Level 3 qualifications (e.g. A-levels or BTEC Nationals), you will be considered for the HNC Civil Engineering. On successful completion of the HNC you will be able to progress to the appropriate level of this programme (usually level 2/HE5). If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

BEng in Civil Engineering (full-time)

University of Bolton
Campus Full time 3 years

The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. Civil engineering changes lives - from transport necessities such as roads, railways and airports, through glittering steel and glass skyscrapers and hotels, to life saving water management systems such as dams, flood... [+]

Bachelors 2017 in Baden-Württemberg Germany. Civil Engineering - BEng (Hons) full-time The BEng (Hons) Civil Engineering will give you the technological, vocational and personal skills for a career in the civil engineering industry or will support your professional development if you are already working in the field. Civil engineering changes lives - from transport necessities such as roads, railways and airports, through glittering steel and glass skyscrapers and hotels, to life saving water management systems such as dams, flood defences and even sewers. If you want to build for the future then the University of Bolton offers the best preparation for a career in this vital, innovative and prestigious industry. By studying on the course you will develop the necessary theoretical understanding and practical knowledge for the role and you will enhance your ability to apply the principles of analysis and evaluation to civil engineering and construction-related problems. You will have access to well-equipped materials, hydraulics, geotechnical and structures laboratories, an extensive range of the latest surveying equipment and the University’s unique design studio facilities with the latest CAD software and hardware. About the course Our dedicated staff team will provide you with a high level of support throughout your studies. All the teaching staff are construction industry professionals with extensive experience and knowledge of the industry and they are all active in the industry’s professional bodies. You will learn through a mix of learning methods including field, laboratory and project work, lectures, seminars and tutorials. Assessment methods include coursework, project work, presentations and examinations. A large proportion of your studies will mirror conditions in the industry. This includes an interdisciplinary group project in your final year which simulates the process of a construction project from inception to completion and in which you will carry out the role of a civil engineer working within a team of other construction specialists. As the department has close contacts with the industry you may have the opportunity to take part in site visits. Professionals from the construction industry, including former students, regularly give talks and lectures on the course. Special features The University’s unique design studio offers excellent facilities including CAD software and hardware. There is a strong emphasis on hands-on training and experience throughout the department and you will have the opportunity to carry out tests and work with construction materials using the University’s first-rate laboratory facilities. You will receive support throughout your studies from teaching staff who are all professionals from the construction industry with excellent business and professional contacts. What you will learn You will acquire a thorough understanding of the practical skills in civil engineering, including construction techniques, the properties of construction materials, structural, geotechnical, hydraulics, surveying, highway and transport engineering. You will build your knowledge of the theoretical principles that underpin the role, including applied mathematics and research methods and learn the relevant associated skills in communications, IT and management. What you will study Level 1 (HE4) Communications Technology; Construction and Materials Technology 1; Ground and Water Studies 1; Site Surveying and Site Practice; Mathematics and Structural Analysis; Mathematics and Structural Design. Level 2 (HE5) Construction Management; Ground and Water Studies 2; Highway Design and Control; Research Methods and Professional Practice; Engineering Mathematics and Structures; Construction and Materials Technology 2. You will attend a combined six day residential field course for Surveying and Geotechnical Engineering. Level 3 (HE6) Advanced Structural Analysis and Design; Dissertation; Geotechnical Engineering and Ground Improvement; Interdisciplinary Project. In addition, you will study one optional module selected from Advanced Surveying Procedures; Concrete Technology and Practice; Construction Management; Project and Environmental Management; Structural Planning; Transport Studies; and Water Engineering and the Environment (*subject to availability). Entry requirements 260 UCAS points from at least two A2-levels (or equivalent) including mathematics (or equivalent), or successful completion of the Engineering Foundation Year. General Studies will not be counted towards the UCAS points requirement. You should also have five GCSEs at grade C or above (or equivalent) including English, mathematics and science. Qualifications other than A-levels are acceptable. For instance, BTEC National qualifications in civil engineering, construction or engineering will be considered where units in additional maths and an analytical subject such as structural mechanics or environmental science are taken. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

LLB in Law

University of Bolton
Campus Full time 3 - 5 years

The LLB (Hons) Law degree at the University of Bolton includes the initial or academic stage of training in the process of becoming a solicitor or barrister. Successful completion of this course will enable you to progress to further training, leading to qualification to practice as a barrister or as a solicitor. An LLB law degree is highly regarded by many employers and you may choose to use this qualification as the basis for graduate level... [+]

Law - LLB (Hons) The LLB (Hons) Law degree at the University of Bolton includes the initial or academic stage of training in the process of becoming a solicitor or barrister. Successful completion of this course will enable you to progress to further training, leading to qualification to practice as a barrister or as a solicitor. An LLB law degree is highly regarded by many employers and you may choose to use this qualification as the basis for graduate level entry into other careers; for example in commerce, industry, the civil service and the armed forces. By studying this challenging and demanding course you will gain a thorough grounding in the discipline of law. You will develop the transferable intellectual and personal skills that are essential for the practice of law and which will also equip you for many other careers. These skills include written and verbal communication, attention to detail, absorbing and analysing often complex information, time management, teamwork and motivation. About the course The Solicitors’ Regulation Authority and the Bar Standards Board, the national professional bodies for law, have accredited the University of Bolton for the purposes of the solicitors’ and barristers’ academic stage requirements. You will study at the University’s Business School, and receive excellent levels of contact and interaction with both teaching staff and your fellow students. This will ensure a friendly, supportive and student-centred approach to your study experience. The course is challenging and requires motivation and self-direction as well as the ability to work in a small group environment. You will be expected to think and to challenge at every stage of the course. You will be taught through a mix of lectures, seminars, tutorials and group work. The application of your knowledge and understanding to real cases and scenarios will be a key component of your studies. Staff members are highly qualified in the field and offer a range of contacts with potential employers including the legal profession. You are required to pass all assessments and examinations in the 'foundations of legal knowledge'. Special features As well as lectures we offer small group tutorials to learn about the application of law to problems and issues. These sessions develop generic, transferable skills and are important for revision and exam preparation. The Bolton law Society gives awards to outstanding students within the year. This accolade can be an important stepping stone into a legal career. Our own court room will facilitate teaching advocacy skills and be a venue for guest speakers. We are also happy to develop links with other subject areas. The University has forged links with bodies such as the Bolton Law Society. Links with local employers: a dedicated member of our team makes links between Law at the University of Bolton and local employers and magistrates. Personal tuition: regular class sessions give small groups of students a chance to have close contact with their personal tutor. These are designed to build up student confidence, study skills and life skills. What you will learn Your study will be based on the requirements defined by the Solicitors Regulation Authority and the Bar Standards Board for the initial or academic stage of training to practice in the legal profession. You will establish your knowledge and understanding of the doctrines and principles which underpin the law of England and Wales. You will learn about the sources of the law, how it is made and developed, the institutions within which that law is administered and the personnel who practice law. You will learn a wide range of legal concepts, values, principles and rules of English law and how to explain the relationship between them in a number of particular areas. You will develop the intellectual and practical skills needed to research and analyse the law from primary resources on specific matters and to apply the findings of such work to the solution of legal problems. You will also develop your ability to communicate these findings, both orally and in writing, in a manner that is appropriate to the needs of a variety of audiences. The course will extend your intellectual and evaluative powers. You will gain appropriate transferable and legal skills, the ability to pursue a course of independent study and you will develop your creative thought processes. What you will study Level 1 Core modules (120 credits - each module is 20 credits): English Legal System; Contract Law; Criminal Law; Law of Tort; Legal Skills 1. Level 2 Core modules (120 credits): Public Law; Professionals in Practice (Law); European Law; Equity and Trusts; Human Rights Law; Legal Skills 2. Level 3 Core modules: Land Law (20 credits); PLUS Legal Skills 3 (Law Project) (40 credits) OR Investigative Study (20 credits). Option modules (choose three options if you take Legal Skills 3 or four options if you take Investigative Study as the core above): Law of Evidence (20 credits); Employment Law (20 credits); Family Law (20 credits); Company Law (20 credits); Jurisprudence (20 credits); Intellectual Property Law (20 credits); Financial Crime (20 credits). Entry requirements 280 UCAS points from at least three A2-levels (or equivalent) in any subjects. You should also have five GCSEs at grade C or above (or equivalent) including English. You may be required to pass a diagnostic test prior to admission. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

BDes in Special Effects for Film & Television

University of Bolton
Campus Full time 3 - 6 years

This programme is for students who wish to combine design creativity, physical model making skills and cutting edge 2 and 3D computer modelling and prototyping in the creation of a variety of special effects for film, television and theatre. It offers a wide spectrum of opportunities in model design work, ranging from the highly accurate engineering approach of the product modeller, to the imaginative and inventive solutions of special... [+]

Bachelors 2017 in Baden-Württemberg Germany. Special Effects for Film & Television - BDes (Hons) This programme is for students who wish to combine design creativity, physical model making skills and cutting edge 2 and 3D computer modelling and prototyping in the creation of a variety of special effects for film, television and theatre. It offers a wide spectrum of opportunities in model design work, ranging from the highly accurate engineering approach of the product modeller, to the imaginative and inventive solutions of special effects designers/animators in advertising, film and TV. Although this programme focuses on the creation and use of physical assets, any modern large scale film or TV production will utilise both physical and digital effects. While you will specialise in your chosen area you will work across fields so that you develop an understanding of the overall production workflow and your contribution to it. You will be taught through lectures, seminars and tutorials and a great deal of the teaching underpins academic theory as applied to real-life practical scenarios. Special features The programme uses its strong industry links to great effect by bringing in guest speakers from industry, demonstrations of materials and processes from relevant companies, visits to trade events and the opportunity to be involved with graduate recruitment events. You will benefit from our pyrotechnical, make-up and animatronics design expertise and be able to study specialist modules in these areas. There are opportunities to attend European conferences and trade events. What you will learn The programme is made up of modules covering various aspects of designing and making models/sets and the use of digital compositing, animation and CG to create visual effects to be used in scenes within film, TV and commercials. Most of the coursework is project-based, and structured to simulate professional situations as much as possible. Starting with more directed, skills-based work, the student progresses to have increasing control over their own studies, ultimately proposing creative work which reflects their own strengths and interests. As well as developing visual ideas and practical skills, special effects artists have to be able to communicate verbally, and to be able to analyse and synthesise ideas in words. They have to be able to take an idea from a brief or script scene and analyse the most efficient way to execute the process in turning this vision into reality whether using live action practical effects or digital visual effects. Consequently, the programme includes an element of research, discussion, verbal presentation and written work. What you will study Level 1: Scholarship; 3D Physical Processes; Introduction to Visual Effects; Introduction to FX Modelmaking; Introduction to 3D CG; 3D CGI 2. Level 2: Employability and Entrepreneurial Skills; Advanced 3D Physical Processes; Multi Year Group FX Project; Portfolio; Visual Effects & Colour Correction; History of SFX/Animatronics/Make-up/Pyrotechnics. Level 3: Research; Advanced FX Modelmaking; Multi Year Group FX Project 2; Bigature Modelmaking; Major Project. Entry requirements 260 UCAS points from at least two A2-levels (or equivalent) in any subjects. You should also have five GCSEs at grade C or above (or equivalent) including English and mathematics. You will be invited to attend an interview at which you will need to present a portfolio of your recent image-related or project-based work. The quality of the portfolio/interview is the primary basis on which applicants are selected; therefore special consideration will be given to applicants without the above qualifications who have a strong portfolio. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

BEng in Mechanical Engineering with Foundation (full-time)

University of Bolton
Campus Full time 4 years

The BEng (Hons) Mechanical Engineering with Foundation at the University of Bolton will equip you with the skills and knowledge for a career in the mechanical engineering profession – a profession that is essential in so many areas of the modern world, including design and manufacture, construction, energy, aerospace and automobile manufacture... [+]

Mechanical Engineering with Foundation - BEng (Hons) full-time The BEng (Hons) Mechanical Engineering with Foundation at the University of Bolton will equip you with the skills and knowledge for a career in the mechanical engineering profession – a profession that is essential in so many areas of the modern world, including design and manufacture, construction, energy, aerospace and automobile manufacture. Throughout the course, you will develop management, organisation and employability skills alongside your subject-specific knowledge and understanding. Your studies will focus on particular areas of engineering such as mechanical design, systems engineering, analysis of materials and structures, and the theory and application of finite element analysis. You will study the theory and practice of mechanical engineering, and carry out case studies, practical and laboratory work and problem-solving projects. You will also develop the presentation and managerial skills that you will use to manage engineering projects and support your future career development in the industry. This course has recently been reviewed and reconfigured by the University with a view to gaining accreditation from the Institution of Mechanical Engineers (IMechE). The course uses UK-SPEC learning outcomes and has been designed to meet the academic requirements leading to Chartered Engineer (CEng) status. Please see the Engineering Council UK website for further details of UK-SPEC. About the course The Foundation Year is the first year of the course and offers a transitional period of study for those students who do not have the necessary qualifications for direct entry on to the main engineering degree courses. The foundation year is an integral part of many of our four-year engineering-based courses; it will provide you with an excellent grounding in the fundamentals of science and mathematics and prepare you for degree level study. During your foundation year you will study the key engineering subjects, including Foundation Mathematics, Foundation Mechanics, Electrical & Electronic Principles, Thermal & Environmental Studies, Engineering Principles and Engineering Systems & Investigations. International students will have the option to study the English language. In addition to learning about the theories and principles of engineering, you will have the opportunity to develop valuable practical and investigative experience in our specialist engineering laboratories. The Engineering Department has a strong tradition in the field of engineering education and engineering courses have been delivered successfully at Bolton for 40 years. All of our academic staff are highly qualified in their own fields and many of them are chartered engineers with substantial experience in the engineering sector. The department offers a friendly, yet challenging, environment where the emphasis is on both the theories and principles of mechanical engineering and their application in a work context. During your studies you will have the opportunity to work on real engineering projects and participate in inter-university student competitions. The course has been designed so that you may transfer to the MEng course if you wish to do so, providing you have performed to an appropriate standard in your Level HE5 studies, and are able to gain funding. Special features You will have access to modern, dedicated engineering laboratories and the University’s state-of-the-art design development and project facilities. The design and project areas are equipped with industry-standard engineering design, analysis and manufacturing software, including SolidWorks, Ansys, Delcam and other visualisation and prototyping capabilities. The course brings together a broad range of engineering design and analysis disciplines and emphasises the application of engineering principles to real-life engineering problems and situations. Staff are approachable, friendly and supportive and you will be taught in modern teaching rooms, with small class sizes. Teaching staff are highly qualified within their fields and have substantial teaching and industrial experience. Many have established an excellent reputation for their work both nationally and internationally and are engaged in research relevant to their discipline; for example, in composite materials and artificial intelligence. Your final year project allows you to demonstrate your knowledge and understanding when investigating and providing solutions to engineering problems. Some projects may be on ‘live’ problems from local industry or in-house research activity. On progressing to Level HE4 of the course you will be expected to participate in the IMechE’s annual Undergraduate Design Challenge involving all universities in the North West. What you will learn You will learn the key theories and principles of mechanical engineering and their application in real engineering contexts. You will acquire the relevant knowledge and skills required by a modern mechanical engineer to undertake the challenging, and rewarding, roles available in this sector. You will develop an understanding of all aspects of engineering projects; for example, costings, the science and maths of these projects, functional design materials and project management. You will also develop the necessary business skills for a career in this field such as IT, time management, presentation, oral and written communications. What you will study Foundation Year (Level 0) Foundation Mathematics 1; Foundation Mechanics; Electrical and Electronic Principles; Thermal and Environmental Studies; Engineering Principles; Engineering Systems and Investigations; English Language (international students only). Level HE4 Engineering Principles 1+2; Engineering Environment; Graphical Communications and Computer Modelling; Projects and Systems. Level HE5 Engineering Applications; Mechanics of Materials and Machines; Thermofluids and Control Systems; Engineering Modelling and Analysis; Mechanical Design. Level HE6 BEng (Hons) Design and Individual Project; Advanced Thermofluids and Control; Advanced Structures and Materials; Finite Element and Difference Solutions; Management and Enterprise in Engineering. Entry requirements 120 UCAS points from least one A2-level (or equivalent) in any subjects. You should also have five GCSEs at grade C or above (or equivalent) including mathematics and science. Applications from students with alternative Level 3 qualifications (e.g. City & Guilds) are welcomed. An interview may be used to assess your suitability or entry point onto the programme. If English is not your first language you will also normally need IELTS 5.5 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]

LLB in Law with Foundation

University of Bolton
Campus Full time 4 years

The four year LLB (Hons) Law with Foundation programme at the University of Bolton includes the initial or academic stage of training in the process of becoming a solicitor or barrister. Successful completion of this course will enable you to progress to further training, leading to qualification to practice as a barrister or as a solicitor. An LLB law degree is highly regarded by many employers and will also open doors into careers in... [+]

Bachelors 2017 in Baden-Württemberg Germany. Law with Foundation - LLB (Hons) full-time The four year LLB (Hons) Law with Foundation programme at the University of Bolton includes the initial or academic stage of training in the process of becoming a solicitor or barrister. Successful completion of this course will enable you to progress to further training, leading to qualification to practice as a barrister or as a solicitor. An LLB law degree is highly regarded by many employers and will also open doors into careers in commerce, industry, the civil service, the armed forces and a host of other sectors. The first year is a foundation year that will introduce you to key areas of law and raise your awareness of the legal system and the law-making process in England and Wales. It will also introduce you to general study skills such as finding, understanding and using appropriate academic resources, as well as skills specific to law such as mooting and how to interview a client. On successful completion of the foundation year you will undertake your degree-level studies. You will study a range of core modules that include the seven foundations of legal knowledge, and choose from a range of option modules that allow you to tailor your degree to match your interests and strengths. By studying this challenging and demanding course you will gain a thorough grounding in the discipline of law. You will develop the transferable intellectual and personal skills that are essential for the practice of law and which will also equip you for many other careers. These skills include written and verbal communication, attention to detail, absorbing and analysing often complex information, time management, teamwork and motivation. About the course The Solicitors’ Regulation Authority and the Bar Standards Board, the national professional bodies for law, have accredited the University of Bolton for the purposes of the solicitors’ and barristers’ academic stage requirements. You will study at the Bolton Business School, and receive excellent levels of contact and interaction with both teaching staff and your fellow students. This will ensure a friendly, supportive and student-centred approach to your study experience. The course is challenging and requires motivation and self-direction as well as the ability to work in a small group environment. You will be expected to think and to challenge at every stage of the course. You will be taught through a mix of lectures, seminars, tutorials and group work. The application of your knowledge and understanding to real cases and scenarios will be a key component of your studies. Staff members are highly qualified in the field and offer a range of contacts with potential employers including the legal profession. You are required to pass all assessments and examinations in the 'foundations of legal knowledge'. For further information visit the 'related links' section for a link to our 'foundations of legal knowledge' web page. Special features As well as lectures we offer small group tutorials to learn about the application of law to problems and issues. These sessions develop generic, transferable skills and are important for revision and exam preparation. The Bolton Law Society gives awards to outstanding students. This accolade can be an important stepping stone into a legal career. Our own court room facilitates teaching advocacy skills and is a venue for guest speakers. The University has forged links with bodies such as the Bolton Law Society. Links with local employers: a dedicated member of our team makes links between Law at the University of Bolton and local employers and magistrates. Personal tuition: regular class sessions give small groups of students a chance to have close contact with their personal tutor. These are designed to build up student confidence, study skills and life skills. What you will learn Your study will be based on the requirements defined by the Solicitors Regulation Authority and the Bar Standards Board for the initial or academic stage of training to practice in the legal profession. You will establish your knowledge and understanding of the doctrines and principles which underpin the law of England and Wales. You will learn about the sources of the law, how it is made and developed, the institutions within which that law is administered and the personnel who practice law. You will learn a wide range of legal concepts, values, principles and rules of English law and how to explain the relationship between them in a number of particular areas. You will develop the intellectual and practical skills needed to research and analyse the law from primary resources on specific matters and to apply the findings of such work to the solution of legal problems. You will also develop your ability to communicate these findings, both orally and in writing, in a manner that is appropriate to the needs of a variety of audiences. The course will extend your intellectual and evaluative powers. You will gain appropriate transferable and legal skills, the ability to pursue a course of independent study and you will develop your creative thought processes. What you will study Foundation Year (Level 0) Please note that the following module titles are be to confirmed. Skills 101; Skills 102; Learning the Law - An Introduction; Law in Contexts; Core Legal Principles – Seven Key Areas: Mooting and Interviewing Skills. Level 1 Core modules (120 credits - each module is 20 credits): English Legal System; Contract Law; Criminal Law; Law of Tort; Legal Skills 1; Consumer Law. Level 2 Core modules (120 credits): Public Law; Professionals in Practice (Law); European Law; Equity and Trusts; Human Rights Law; Legal Skills 2. Level 3 Core modules: Land Law (20 credits); PLUS Legal Skills 3 (Law Project) (40 credits) OR Investigative Study (20 credits). Option modules (choose three options if you take Legal Skills 3 or four options if you take Investigative Study as the core above): Law of Evidence (20 credits); Employment Law (20 credits); Family Law (20 credits); Company Law (20 credits); Jurisprudence (20 credits); Intellectual Property Law (20 credits); Financial Crime (20 credits). Entry requirements 120 UCAS points from at least one, but preferably two, A2-levels (or equivalent) in any subjects. You should also have five GCSEs at grade C or above (or equivalent) including English. You may be required to pass a diagnostic test prior to admission. If English is not your first language you will also normally need IELTS 6.0 (or equivalent). If you do not have the required English level, you can study English with us from IELTS 4.0 (or equivalent). [-]